Most homeowners overwater their yard, unintentionally wasting money every time they take out the hose or turn on the sprinklers. Using an automated irrigation system is one of the best ways to keep your lawn and landscape beautiful and healthy while minimizing water waste. Make time each season to be sure you’re getting the most out of your irrigation system while keeping utility bills low and helping to protect the environment.
What is Toro WaterSmart®?
Every component of an efficient and effective irrigation system – the controller, valves, and sprinklers – work together to ensure your landscape, or your customers’ landscapes, are properly irrigated. According to the United States Environmental Protection Agency, as much as 50 percent of the water used for outdoor irrigation is lost or wasted due to over-watering, runoff, or evaporation. Toro WaterSmart Products can be retrofit or added to any system to provide water savings and better irrigation efficiency while maintaining healthy landscapes.
How to Make Your Irrigation System Smart
In this blog, we’ll cover how to get started with your smart irrigation system, planning & planting considerations, installation, scheduling & watering recommendations, and finally – system upgrades and maintenance tips. Let’s get started!
Smart Start to Your Irrigation System
Creating an efficient irrigation system requires specialized knowledge and understanding of irrigation design principles and local environmental conditions — something most weekend gardeners don’t have. Complying with local installation codes is another consideration.
Even the best irrigation design won’t perform well if installed incorrectly or using inferior components. Something as simple as selecting the correct type of pipe can mean the difference between a system that lasts and one that requires ongoing repairs.
Hiring a certified or licensed irrigation professional and insisting on high-quality components is the smart way to make sure your system will operate at peak efficiency for years to come. Always get multiple bids, check references and confirm your preferred vendor is properly insured.
Smart Planning & Planting
Guarantee long-term satisfaction with your irrigation system with up-front planning. Follow this 8-Step Smart Planning & Planting Checklist below for best results.
- Work with a certified irrigation designer or contractor who has experience in your local area.
- Consider local climate conditions, as well as your lot’s exact features. Choose appropriate turf and plant species that have low water requirements.
- Group plants with similar water needs close together and separate lawn areas from planting beds.
- Plan your irrigation zones carefully. Be sure that your system will have enough capacity, now and in the future. The more irrigation zones you plan, the more you can tailor watering even if you modify landscaping.
- Consult with your local water provider to see if rebates are available for water-efficient products.
- Check the on-site water pressure and select appropriate sprinklers. Low or high water pressure can seriously affect sprinkler performance.
- Include “smart” controls that automatically adjust watering based on rain, soil moisture, evaporation, and plant water use.
- Use quality components to minimize future maintenance needs and total lifetime cost of your system.
Smart Irrigation System Installation
Use components that provide the greatest flexibility. Different plants have different watering needs, and these needs may change over time. As a result, your irrigation system should allow you to apply the right amount of water for each type of plant by the most effective method.
- Always install excess irrigation zone capacity. Irrigation zones are areas that are watered by the same irrigation valve and plumbing. So, installing extra connections now makes it easier and less expensive to expand your irrigation system later.
- Include the right backflow prevention device as required by the plumbing codes for all irrigation systems. Backflow prevention devices prevent irrigation system water from contaminating the water supply.
- Install lines deep enough to protect them from damage from aeration and other lawn maintenance.
Smart Scheduling & Watering
Today’s irrigation controllers allow you to easily adjust your system’s watering schedule to fit different watering needs. Follow these 7 tips for smart scheduling and watering.
- Schedule each individual zone in your irrigation system to account for sun, shade and wind exposure.
- Consider soil type, which affects how quickly water can be applied and absorbed without runoff.
- Make sure you’re not sending water down the drain. Set sprinklers to water plants, not your driveway, sidewalk, patio or buildings.
- Water at the right time of day. Watering when the sun is low, winds are calm and temperatures are cooler minimizes evaporation by as much as 30 percent. For that reason the best time to water is during early morning hours.
- Thoroughly soak the root zone (generally within the top six inches of soil for lawns), then let the soil dry. Watering too frequently results in shallow roots and encourages weed growth, disease, and fungus.
- Reduce runoff by watering each zone more often for shorter periods. For example, setting your system to run for three, 5-minute intervals with some soak time lets water infiltrate the soil better than watering for 15 minutes at one time.
- Adjust your watering schedule regularly to account for seasonal weather conditions, plant size, and other factors. Monthly (or even weekly) adjustments keep plants healthy without overwatering.
Smart Irrigation Maintenance & Upgrades
Damage from lawn equipment or improper winterization can cause leaks and other serious problems. Consequently, irrigation systems need regular maintenance to keep them working efficiently year after year. Make sure to follow these smart irrigation maintenance tips to avoid any system issues in the future:
- Inspect the system for leaks, broken or clogged sprinkler heads or other damaged components.
- Check that sprinkler heads are high enough to clear plants that may have grown taller since the system was installed.
- Adjust spray patterns and positions to make sure they aren’t watering “hardscapes” like sidewalks and buildings.
- Evaluate pressure and adjust as needed so sprinklers work optimally to distribute the water.
- Retrofit the system with a rain or soil moisture sensor to prevent overwatering. Rain sensors stop the system from operating when it rains. Soil moisture sensors use long metal probes to measure moisture at the root zone and turn off the system when no additional water is needed. Weather-based controllers automatically adjust the irrigation schedule as weather conditions change.
- Before upgrading your system, check to see if your local water provider offers rebates on any products you are considering.
